SHEETS

Rationalised sizes of Angles and Section Weight

The Coils are uncoiled and cut into a desired width by the process of slitting the coils, and the desired length by uncoiling the coils and cut them into a required length. Coils that is cut to length (CTL) is normally shipped flat-stacked and that is called as Sheets. Sheets are of different types like H.R Sheets, C.R Sheets, G.P Sheets, G.C Sheets, Stainless Steel Sheets etc.

  • Sheets

HR / CR Sheets


Gauge
Thickness
(mm)
Weight
(kg / sq.m)
Grades available
8
4
31.40
} IS : 2062 Gr. A / Gr. B / Gr. C, IS : 2002
} ASTM A36. ASTM A285 Gr. C, ASTM A588 Gr. A
} SAILMA 300HI / 350HI / 410HI / 450HI
} ASTM A515 / A516 Gr. 60, 65, 70
} ASTM A204 Gr. B, ASTM A537 CI-1
} SAIL HARD, SAIL-COR, DEAD SOFT QUALITY
} LLOYDS Gr. A, NCD 1431, NE S-791
} GOST 5521, DIN-17100, 17155
} API 5LX42, 46, 52, 56
} IRSM-41, SBQ Gr. A
} IS : 8500, IS : 5986
} LO-PEARL, E-38 / E-34
} IS : 3502 FOR CHEQUERED PLATES
9
3.55
27.90
10
3.15
24.75
11
2.80
22.00
12
2.50
19.60
13
2.25
17.00
14
2.00
15.70
15
1.80
14.15
16
1.60
12.55
17
1.40
11.00
18
1.25
9.80
19
1.12
8.80
20
1.00
7.85
21
0.90
7.05
22
0.80
6.30
24
0.63
4.95
26
0.50
3.90
28
0.40
3.15

Galvanised Plain Sheets

Thickness 
mm
Width
 mm
Length 
mm
0.3, 0.35, 0.4, 0.45
900, 1000
2500, 3000
0.5, 0.55, 0.6
900, 1000, 1100
2500, 3000
0.63, 0.8, 1, 1.25, 1.4, 1.6
900, 1000, 1100, 1200, 1220
2500, 3000

Galvanised Corrugated Sheets

Thickness 
mm (Gauge in bracket)

Width 
mm

Length 
mm

1.6 (16),1.25 (18), 1.00(20), 0.8(22), 0.63(24) & 0.50(26)

810 & 910

2500 & 3000